• Maximize your investment with five instruments in one device
• Increase your productivity with extensive built-in power measurement capabilities
• Flexible IO: LAN/LXI Core, USB and GPIB
• Lower your cost of ownership with global support & the longest standard warranty in the industry

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight 6812C Data sheet
• Keysight 6812C User Manual

• Maximize your investment with five instruments in one device
• Increase your productivity with extensive built-in power measurement capabilities
• Flexible IO: LAN/LXI Core, USB and GPIB
• Lower your cost of ownership with global support & the longest standard warranty in the industry

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight 6812C Data sheet
• Keysight 6812C User Manual

• Increase your uptime with stable, reliable AC power source
• Engineer reliability into your designs with a basic AC power source
• Test your designs with confidence
• Test under real-world conditions - fluctuating voltage or transient spikes
• Easily access setup and measurement information

Specifications

• Maximum Output Power: 1000 VA
• Maximum rms Current: 10 A
• Connectivity: LAN, USB
• Peak Current: 30 A
• DC Power: 800 W
• DC Voltage: 219 V/438 V
• DC Current: 8 A

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight AC6802B Data sheet
• Keysight AC6802B User Manual

• Increase your uptime with stable, reliable AC power source
• Engineer reliability into your designs with a basic AC power source
• Test your designs with confidence
• Test under real-world conditions - fluctuating voltage or transient spikes
• Easily access setup and measurement information

Specifications

• Maximum Output Power: 2000 VA
• Maximum rms Current: 20 A
• Connectivity: LAN, USB
• Peak Current: 60 A
• Maximum Frequency: 500 Hz
• DC Power: 1600 W
• DC Voltage: 219 V/438 V
• DC Current: 16 A
• RMS Voltage: 155 Vrms/310 Vrms

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight AC6803A Data sheet
• Keysight AC6803A User Manual

Because You Can’t Afford Downtime

Engineer reliability into your designs with Keysight's AC6800 Series Basic AC Sources. Maximize your uptime with our remote control power source and test with the confidence that your products will perform as designed.

Whether you want to manually control your basic AC source on your R&D bench or use in a fully automated test rack, it must provide stable, dependable AC power to your DUT. With the Keysight AC6800 you can:

• Simulate global AC power conditions
• Test varying frequency and voltage combinations to simulate real-world conditions
• Perform power factor correction testing
• Run AC /DC applications such as testing your input circuitry to look at ripple voltage

Specifications

• Maximum Output Power: 4000 VA
• Maximum rms Current: 40 A
• Connectivity: LAN, USB
• Peak Current: 120 A
• DC Power: 3200 W
• DC Voltage: 219 V/438 V
• DC Current: 32 A
• RMS Voltage: 155 Vrms/310 Vrms
• Increase your uptime with stable, reliable AC power source
• Engineer reliability into your designs with a basic AC power source
• Test your designs with confidence
• Test under real-world conditions - fluctuating voltage or transient spike
• Easily access setup and measurement information

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight AC6804B Data sheet
• Keysight AC6804B User Manual

The Keysight B2901A precision source / measure unit (SMU) is a 1-channel, compact, and cost-effective benchtop SMU with the capability to source and measure both voltage and current. It is versatile to easily perform current versus voltage (I/V) measurement with high accuracy.

Measurement Capabilities

• Configuration supports one-channel
• Minimum source resolution at 1 pA /1 μV, minimum measurement resolution at 100 fA / 100 nV
• Maximum output at 210 V, 3 A DC / 10.5 A pulse
• Waveform generation (arbitrary) and digitizing capabilities from 20 μs interval

Key features

• Measurement capabilities using an integrated 4-quadrant source
• Color 4.3’’ color display supports both graphical and numerical view modes
• Application software to facilitate PC-based instrument control included at no charge
• High throughput and SCPI command support conventional SMU's command set

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2901A Data sheet
• Keysight B2901A Configuration Guide
• Keysight B2901A User Manual

The Keysight B2901BL precision source / measure unit (SMU) is a 1-channel, compact, and cost-effective benchtop SMU with the capability to source and measure both voltage and current with high accuracy. The 4-quadrant source and measurement capabilities enable taking I/V measurements without configuring multiple instruments.

Measurement Capabilities

• Configuration supports one-channel setup
• Minimum source resolution at 10 pA /1 μV, minimum measurement resolution at 1 pA / 100 nV
• Maximum output at 21 V, 1.5 A DC
• Waveform generation (arbitrary) and digitizing capabilities from 200 μs interval

Key Features

• Measurement capabilities with an integrated 4-quadrant source
• Color 4.3-inch display supports both graphical and numerical view modes
• Application software facilitates PC-based instrument control included at no charge
• High throughput and SCPI command supporting conventional SMU's command set

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2901BL Data sheet
• Keysight B2901BL Configuration Guide
• Keysight B2901BL User Manual

The Keysight B2902B precision source / measure unit (SMU) is a 2-channel, compact, and cost-effective benchtop SMU with the capability to source and measure both voltage and current. It easily measures current versus voltage (I/V) with high accuracy. The 4-quadrant source and measurement capabilities enable taking I/V measurements without configuring multiple instruments.

Measurement Capabilities

• Configuration supports 2-channel setup
• Minimum source resolution at 1 pA / 1 μV, minimum measurement resolution at 100 fA / 100 nV
• Maximum output at 210 V, 3 A DC / 1 0.5 A pulse
• Waveform generation (arbitrary) and digitizing capabilities from 20 μs interval

Key Features

• Measurement capabilities with an integrated 4-quadrant source
• Color 4.3-inch display supports both graphical and numerical view modes
• Application software facilitates PC-based instrument control included at no charge
• High throughput and SCPI command support conventional SMU’s command set

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2902B Data sheet
• Keysight B2902B Configuration Guide
• Keysight B2902B User Manual

The Keysight B2910BL Precision Source / Measure Unit (SMU) is a 1-channel, compact and cost-effective bench-top SMU with the capability to source and measure both voltage and current. It is versatile to perform I/V (current vs. voltage) measurement easily with high accuracy. Integration of 4 quadrant source and measurement capabilities enables I/V measurement simply and easily without configuring multiple instruments.

Measurement Capabilities

• Supports one-channel configuration
• Minimum source resolution: 100 fA /1 μV, Minimum measurement resolution: 10 fA /100 nV
• Maximum output: 210 V, 1.5 A DC
• Arbitrary waveform generation and digitizing capabilities from 50 μs interval

General Features

• Integrated 4-quadrant source and measurement capabilities
• The 4.3’’ color display supports both graphical and numerical view modes
• Free application software to facilitate PC-based instrument control
• High throughput and SCPI command supporting conventional SMU command set

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2910BL Data sheet
• Keysight B2910BL Configuration Guide
• Keysight B2910BL User Manual

The Keysight B2912B precision source / measure unit (SMU) is a 2-channel, compact, and cost-effective benchtop SMU with the capability to source and measure both voltage and current. It easily measures current versus voltage (I/V) with high accuracy. The 4-quadrant source and measurement capabilities enable taking I/V measurements without configuring multiple instruments.

Measurement Capabilities

• Configuration supports two-channel setup
• Minimum source resolution at 10 fA / 100 nV, minimum measurement resolution at 10 fA / 100 nV
• Maximum output at 210 V, 3 A DC / 10.5 A pulse
• Waveform generation (arbitrary) and digitizing capabilities from 10 μs interval

Key Features

• Measurement capabilities with an integrated 4-quadrant source
• Color 4.3-inch display supports both graphical and numerical view modes
• Application software facilitates PC-based instrument control included at no charge
• High throughput and SCPI command support conventional SMU’s command set

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2912B Data sheet
• Keysight B2912B Configuration Guide
• Keysight B2912B User Manual

The Keysight B2962B Series 6.5-digit low noise source power supplies provide a power supply and source solution that meets the difficult measurement challenges researchers, designers, and developers face working on advanced components, circuits, and materials.

Unlike a typical power supply / source, they support a 4-quadrant operation that gives you the freedom to accurately supply any voltage or current contained within their ranges and power limit regardless of polarity.

Key features

• Get 6.5-digit with wide and bipolar voltage / current sourcing at 100 nV to 210 V / 10 fA to 10.5 A at 31.8 W
• Experience best-in-class noise performance with 10 µVrms, 1 nVrms / √Hz with external filter
• Use the precision arbitrary waveform capability and user-defined waveforms from 1 MHz to 10 kHz

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight B2962B Data sheet
• Keysight B2962B User Manual

Output rating (0 to 40 °C)

• Voltage: 35 V
• Current: 1 A
• Power: 35 W

Programming accuracy

• Voltage: 0.05% + 12 mV
• Current: 0.05% + 0.6 mA

Ripple & noise (20 Hz to 20 MHz)

• Voltage rms: 4 mV
• Voltage peak-to-peak: 60 mV
• Current rms: 400 µA

Readback accuracy

• Voltage: 0.05% + 8 mV
• Current: 0.05% + 0.5 mA

Keysight E36100 Series basic DC power supplies feature a compact size (2U, ¼-rack), a high-contrast OLED display that is viewable from any angle, and modern USB and LAN (LXI Core) connectivity. They also include low power current measurement capability and overvoltage, overcurrent, and overtemperature protection. You can control these power supplies via the intuitive front-panel interface, a Web interface running on a browser, a SCPI or IVI program, Keysight IO Libraries, or a BenchVue app running on your PC or mobile device.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E36104A Data sheet
• Keysight E36104A User Manual

Output Rating : 36 W

• Voltage: 60 V
• Current: 0.6 A
• Power: 36 W

Programming Accuracy : ± (% of output + offset)

• Voltage: 0.05% + 20 mV
• Current: 0.05% + 0.4 mA

Ripple and Noise (20 Hz to 20 MHz)

• Voltage rms: 1.55 mV
• Voltage peak-to-peak: 30 mV
• Current rms: 200 µA

Readback Accuracy : ± (% of output + offset)

• Voltage: 0.05% + 12 mV
• Current: 0.05% + 0.3 mA

Keysight E36100B Series basic DC power supplies feature a compact size (2U, ¼-rack), a high-contrast OLED display that is viewable from any angle, and modern USB and LAN (LXI Core) connectivity.Use the highly accurate low-current measure feature for demanding measurements. Protect your DUT with built-in overvoltage and overcurrent protection, and count on the built-in overtemperature protection to keep your power supply safe. Get connected to your instrument quickly via the intuitive front-panel interface, a web interface running on a browser, a SCPI or IVI program, Keysight IO Libraries, or a BenchVue app running on your PC or mobile device.

Clean, Reliable Power Supply

• Low, normal mode noise specifications assure quality power for precision circuitry applications enabling you to power your design with confidence
• Accurate voltage/current programming and read back capability provides excellent control to precisely power your device under test
• Protection for your device under test (DUT) includes overvoltage, overcurrent, and overtemperature protection

Convenient Benchtop Capabilities

• USB and LAN (LXI Core)
• BenchVue software support and Web interface control

Compact, Intuitive Package

• Save space on your bench, 2U ¼ rack
• Easily view the high contrast OLED display
• Intuitive on-screen menu

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E36105B Data sheet
• Keysight E36105B User Manual

Output rating (0 to 40 °C)

• Voltage: 100 V
• Current: 0.4 A
• Power: 40 W

Programming accuracy

• Voltage: 0.05% + 40 mV
• Current: 0.05% + 0.3 mA

Ripple & noise (20 Hz to 20 MHz)

• Voltage rms: 15 mV
• Voltage peak-to-peak: 150 mV
• Current rms: 160 µA

Readback accuracy

• Voltage: 0.05% + 20 mV
• Current: 0.05% + 0.2 mA

Keysight E36100 Series basic DC power supplies feature a compact size (2U, ¼-rack), a high-contrast OLED display that is viewable from any angle, and modern USB and LAN (LXI Core) connectivity. They also include low power current measurement capability and overvoltage, overcurrent, and overtemperature protection. You can control these power supplies via the intuitive front-panel interface, a Web interface running on a browser, a SCPI or IVI program, Keysight IO Libraries, or a BenchVue app running on your PC or mobile device.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E36106A Data sheet
• Keysight E36106A User Manual

Output Rating- 400 W

• Output 1: 200W, 0 to 60 V, 0 to 10 A
• Output 2: 200W, 0 to 60 V, 0 to 10 A

Programming Accuracy ± (% of output + offset)

• Voltage: 0.03% + 8 mV
• Current: 0.1% + 3 mA

Ripple & Noise (20 Hz to 10 MHz)

• Normal Mode Voltage: <350 µVrms / 3.5 mV p-p
• Normal-mode current: <1 mA rms

Readback Accuracy ± (% of output + offset)

• Voltage: 0.03% + 8 mV
• Current: 0.1% + 3 mA
• Low Range Current, <50 mA: 0.25% + 80 uA

The E36200 series consists of two 200 W single output power supplies and two 400 W dual output power supplies. Autoranging technology provides the highest current available at all output voltage. Power devices with up to 40 A (E36233A) or voltage up to 120 V (E36234A) using auto-parallel or auto-series to internally connect the two outputs into a single output with twice the power. A single output supply can power devices requiring up to 200 W. A dual output supply provides two independent 200 W channels which can be combined into a single 400 W channel.

• Autoranging power supplies produce more current at all voltages
• Auto-parallel combine outputs for higher current up to 40 A
• Auto-series combine outputs for higher voltage up to 120 V
• Variable slew rate controls inrush current
• Overvoltage, overcurrent, and overtemperature provide device protection
• Ripple and noise < 350 µVrms for low noise output
• 4-wire sense improves load regulation
• Built-in data logger measures power over time
• USB, LAN (LXI Core), and optional GPIB simplify connectivity

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E36234A Data sheet
• Keysight E36234A User Manual

 Output Rating - 160 W

• Output 1: 0 to 6 V, 0 to 10 A
• Output 2: 0 to 25 V, 0 to 2 A
• Output 3: 0 to 25 V, 0 to 2 A

Programming Accuracy ±(% of output + offset)

• Voltage: 0.03% + 3 mV, 0.03% + 5 mV, 0.03% + 5 mV
• Current: 0.05% + 4 mA, 0.04% + 3 mA, 0.04% + 3 mA

Ripple & Noise (20 Hz to 20 MHz)

• Normal Mode Voltage: <350 µVrms/ 2 mV p-p, < 1 mVrms/ 5 mVpp, < 1 mVrms/ 5 mVpp
• Normal-mode current: <4 mA rms, <2 mA rms, <1 mA rms

Readback Accuracy ±(% of output + offset)

• Voltage: 0.04% + 3 mV, 0.03% + 5 mV, 0.03% + 5 mV,
• Current: + 0.05% + 5 mA, 0.04% + 3 mA, 0.04% + 3 mA,
• Low Range Current, 20 mA: 0.25% + 80 uA, 0.25% + 80 uA, 0.25% + 80 uA

The E36313A Series triple output power supply is ready for your bench application. With low output ripple/noise and accurate voltage/current measurements, you can test with confidence. You have access to advanced features such as data logging, output sequencing, list mode, and output coupling. The E36312A (80 W) offers the same feature set with reduced power and the E36311A (80 W) is the most economic model with reduced feature set.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E36313A Data sheet
• Keysight E36313A User Manual

Output ratings (@ 0°C to 40°C)

• Range 1: 0 to 8 V / 5 A
• Range 2: 0 to 20 V / 2.5 A

Programming accuracy (@ 25°C ±5°C), ±(% output + offset)

• Voltage: <0.05% + 10 mV (<0.1% + 25 mV for output 2 of E3646/47/48/49A)
• Current: <0.2% + 10 mA

Ripple & noise 20 Hz to 20 MHz

• Normal Mode Voltage: <5 mVpp / 0.5 mVrms
• Normal Mode Current: <4 mArms

Readback accuracy (@ 25°C ±5°C), ±(% output + offset)

• Voltage: <0.05% + 5 mV (<0.1% + 25 mV for output 2 of E3646/47/48/49A)
• Current: <0.15% + 5 mA (<0.15% + 10 mA for output 2 of E3646/47/48/49A)

The E3642A 50 W bench power supply has dual-range flexibility with a low and high voltage range. The low voltage range allows the power supply to output more current. The E3640 Series has models with single and dual outputs—automated tests with GPIB or RS232.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight E3642A Data sheet
• Keysight E3642A User Manual

• 6 Slots - Full Rack Width Mainframe
• 1800 Watts of Total Maximum Power
• 6 Modules available for configuring (150W to 600W)
• Max Voltage Input: 240V (N3303A)
• Max Current Input: 120A (N3306A)

The Keysight N3300A is a full-rack width mainframe with 6-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration. The N3300A holds up to six N3302A, N3303A, N3304A, and N3307A load modules, or up to three N3305A and N3306A load modules, allowing up to 1,800 watts of total maximum power.

Testing multiple output dc power supplies and dc-dc converters can be very time consuming if each output must be tested sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Using the built-in measurement capabilities of the N3300A electronic loads, all outputs can be measured simultaneously. Alternatively, multiple single output power sources can be tested simultaneously.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N3300A Data sheet
• Keysight N3300A User Manual

Output Ratings

• Voltage: 30 V
• Current: 25 A
• Power: 750 W

Connectivity

• LXI, USB, LAN, GPIB

Features

• Compact 1U form factor
• Benchvue software enabled, affording control via your windows PC or Laptop
• Analog control of voltage and current outputs

The single output, 750 W N5745A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog / resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N5745A Data sheet
• Keysight N5745A User Manual

Output Ratings

• Voltage: 60 V
• Current: 12.5 A
• Power: 750 W

Keysight basic DC power supplies offer essential features for a tight budget. The Keysight 750W, single output N5747A provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers solid performance and a variety of basic and enhanced capabilities in a compact 1U package.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N5747A Data sheet
• Keysight N5747A User Manual

Output Ratings

• Voltage: 20 V
• Current: 76 A
• Power: 1520 W

The single output, 1520 W N5764A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N5764A Data sheet
• Keysight N5764A User Manual

Compact and Affordable System DC Power Supplies Up to 1500W

The Keysight N5700 Series delivers low noise power in a compact 1U package. Airflow moves front to back, so no additional space is required above or below the power supply in your automated test equipment (ATE) rack.

Keysight basic DC power supplies offer essential features for a tight budget. The Keysight 1560W, single output N5772A provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers solid performance and a variety of basic and enhanced capabilities in a compact 1U package.

Output Ratings

• Voltage: 600 V
• Current: 2.6 A
• Power: 1560 W
• Small high-density 1U package
• Low noise output as low as 8 mVrms
• Extensive device protection: overcurrent, overvoltage, and under-voltage
• Simple front panel operation — separate voltage and current knob
• Modern I/O: USB, LAN (LXI-Core), and GPIB
• Front to back airflow simplifies rack mounting
• Power supply overtemperature protection
• Connect up to 4 units in parallel for higher current
• Universal AC input: 85 to 265 Vac

BenchVue software enabled: Do more with your PC and instrument together, no programming required. Easily control your power supplies to set parameters and quickly build automated tests on your PC.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N5772A Data sheet
• Keysight N5772A User Manual

Maximum Total Output Power (= Sum of Total Module Output Power)

• 400 W when operating from 100 - 240 VAC input

AC Input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1000 VA typical
• Fuse Internal fuse (not customer accessible)

Protection Response Characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6700B is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700B offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6700B Data sheet
• Keysight N6700B User Manual

Output Ratings

• Voltage: 8 V
• Current: 12.5 A
• Power: 100 W

Programming Accuracy (at 23°C ±5°C)

• Voltage: 0.1% + 19 mV
• Current: 0.15% + 20 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage rms: 2 mV
• Voltage peak-to-peak: 12 mV
• Current rms: 4 mA

The Keysight N6742B is a 100 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6742B Data sheet
• Keysight N6742B User Manual

Output Ratings

• Voltage: 35 V
• Current: 3 A
• Power: 105 W

Programming Accuracy (at 23°C ±5°C)

• Voltage: 0.1% + 35 mV
• Current: 0.15% + 20 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage rms: 5 mV
• Voltage peak-to-peak: 15 mV
• Current rms: 2 mA

The Keysight N6744B is a 105 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6744B Data sheet

Output Ratings

• Voltage: 50 V
• Current: 10 A
• Power: 100 W

Programming accuracy (at 23°C ±5°C)

• Voltage: 0.06% + 19 mV
• Current: 0.1% + 20 mA

Ripple & noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 4.5 mV
• Voltage rms: 350 µV
• Current rms: 2 mA

Keysight high-performance modules increase test flexibility with autoranging outputs, providing higher current at more voltages. Autoranging outputs provide the greatest flexibility to keep up with changes to test requirements. Lower noise and higher accuracy are ideal for precise testing. Eliminate the need for an external multimeter with an accuracy of 0.06%. Fast up and down programming allows for quick testing, up to 50 times faster than a conventional power supply.

• Up and down-programming with resistive load typically 1.5 ms
• Overvoltage, overcurrent, and overtemperature protection
• Modules can operate at lower output power to stay within mainframe output rating
• Modules include a quick disconnect connector

The Keysight N6752A is a 100 W high-performance, autoranging DC power module that provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies. Optional high-speed test extension offers an oscilloscope-like digitizer that increases measurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT).

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6752A Data sheet
• Keysight N6752A User Manual

Output Ratings

• Voltage: 20 V
• Current: 50 A
• Power: 300 W

Programming Accuracy (at 23°C ±5°C)

• Voltage: 0.06% + 10 mV
• Current: 0.1% + 30 mA

Ripple And Noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 5 mV
• Voltage rms: 1 mV
• Current rms: 10 mA

The Keysight N6753A is a 300 W high-performance, autoranging DC power module that provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies. Optional high-speed test extension offers an oscilloscope-like digitizer that increases measurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT).

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6753A Data sheet
• Keysight N6753A User Manual

Output Ratings

• Voltage: 20 V
• Current: 50 A
• Power: 500 W

Programming Accuracy (at 23°C ±5°C)

• Voltage: 0.06% + 10 mV
• Current: 0.1% + 30 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 5 mV
• Voltage rms: 1 mV
• Current rms: 10 mA

The Keysight N6755A is a 500 W high-performance, autoranging DC power module that provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies. Optional high-speed test extension offers an oscilloscope-like digitizer that increases measurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT).

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB and LXI compliance are standard. Select from more than 30 different DC power modules ranging in capability from basic to high precision, and in power from 20-500 Watts.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6755A Data sheet
• Keysight N6755A User Manual

Output ratings

• Voltage: 20 V
• Current: 15 A
• Power: 300 W

Programming accuracy (at 23°C ±5°C)

• Voltage: 0.1% + 20 mV
• Current: 0.15% + 60 mA

Ripple & noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 20 mV
• Voltage rms: 3 mV
• Current rms: 6 mA

The Keysight N6773A is a 300 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6773A Data sheet

Output ratings

• Voltage: 100 V
• Current: 3 A
• Power: 300 W

Programming accuracy (at 23°C ±5°C)

• Voltage: 0.1% +100 mV
• Current: 0.15% + 30 mA

Ripple & noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 45 mV
• Voltage rms: 18 mV
• Current rms: 6 mA

The Keysight N6776A is a 300 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6776A Data sheet

Output Ratings:

• voltage: up to 20 V
• current: up to ±3 A
• power: 20 W

Programming Accuracy (at 23°C ± 5°C after 30 minute warmup; applies from min. to max. program):

• voltage, 20 V range: 0.025% + 1.8 mV
• voltage, 6 V range: 0.025% + 600 µV
• current, 3 A and 1 A ranges: 0.04% + 300 µA
• current, 300 mA range: 0.03% + 150 µA

Transient Response:

• < 30 mV of droop in response to 0.15A / µs current transients

Measurement Accuracy (at 23°C ± 5°C):

• voltage, 20 V range: 0.025% + 1.2 mV*
• current, 3 A range: 0.03% + 250 µA*
• current, 100 mA range: 0.025% + 10 µA*
• current, 10 µA range: 0.025% + 8 nA

*Supports seamless measurement ranging

The Keysight N6781A is a source / measure unit (SMU) designed specifically for the task of battery drain analysis. Whether the device under test (DUT) is an eBook reader, MP3 player, mobile phone, or pacemaker, the N6781A’s seamless measurement ranging, programmable output resistance, and auxiliary DVM combine the best set of advanced features on the market for battery drain analysis. When used with the 14585A Control and Analysis software, the N6781A becomes an even more powerful battery drain analysis solution, offering additional insights into your measurements. Learn more about the 14585A Control and Analysis software.

Seamless Measurement Ranging

Seamless measurement ranging eliminates the challenges of measuring dynamic currents. With seamless measurement ranging, engineers can precisely measure dynamic currents without any glitches or disruptions to the measurement. As the current drawn by the DUT changes, the SMU automatically and instantaneously detects which current measurement ranges will return the most precise measurement and changes to that range seamlessly. When combined with the SMU´s built-in 18-bit digitizer, seamless measurement ranging enables unprecedented effective vertical resolution of 28-bits. This provides unrivaled productivity gains and insights into power consumption by enabling engineers to see the complete current waveform they have never seen before, from nA to A, in one pass and one picture.

Other Features and Benefits

• glitch-free sourcing and measurement: change output and measurement ranges without any glitches
• two-quadrant operation: perform as a voltage or current source or as a CV or CC electronic load
• four current measurement ranges: precisely capture the current levels of the DUT during different modes of operation
• excellent transient response: keep voltage or current stable during high-speed load changes
• fast modulation of DC: create waveforms up to 100 kHz to stimulate or load down the DUT
• high-speed digitized measurements: capture / view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6781A Data sheet
• Keysight N6781A Configuration Guide
• Keysight N6781A User Manual

Deliver exceptional battery life. Only Keysight`s N6780 Series SMUs let you visualize the current drain from nA to A in one pass and one picture unlocking insights to deliver exceptional battery life. Accurately emulate a battery with exceptional sourcing.

• Stable, glitch-free sourcing and sinking (charge/eLoad), just like a battery.
• Programmable output resistance mimics the battery’s internal resistance.

Make measurements you didn’t think were possible.

• Characterize your device’s off-, sleep-, and transmit-mode current in one pass and one picture with Keysight’s exclusive patented seamless measurement ranging technology - no need to make multiple measurement sweeps.
• Perform battery rundown tests and characterize how your device performs with an actual battery with the SMU’s ammeter (zero-burden current shunt) mode.

Output ratings:

• Voltage: 20 V / 15 V / 10 V / 6 V
• Current: ± 4 A / ± 5 A / ± 6.7 A / ± 8 A
• Power: Up to 80 W

Output voltage ripple & noise (PARD) from 20 Hz – 20 MHz:

• CV peak-to-peak: 15 mV
• CVrms: 1.5 mV

Programming accuracy (at 23°C ± 5°C after 30 minute warm-up. Applies from min. to max. program):

• Voltage, 20 V, 15 V, 10 V, and 6 V ranges: 0.025% + 1.8 mV
• Current, 4 A, 5 A, 6.7 A, and 8 A ranges: 0.04% + 1.4 mA

Measurement accuracy (at 23°C ± 5°C)

• Voltage, 20 V range: 0.025% 1.8 mV
• Current, 8 A range: 0.04% + 1.5 mA
• Current, 100 mA range: 0.025% + 10 µA
• Current, 1 mA range: 0.025% + 100 nA

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6785A Data sheet
• Keysight N6785A User Manual

The Keysight N6791A offers 1U height modular electronic DC load module for N6700C mainframes. Capable of sinking power up to 100W per channel and be configured with up to four modules in a mainframe.

• Single-wide module, up to 4 modules in mainframe
• Maximum 100 Watts sinking power per module
• Voltage: Up to 60V
• Current: Up to 20A 
• Advanced operating modes: CV, CC, CR, CP
• Arbitrary waveform generation
• High speed synchronized digitization of voltage and current
• Superior command processing time and current slew rate
• USB, LAN, GPIB interfaces standard
• N6700C style user interface for ease of use and familiarity

Testing multiple DC power conversion systems can be time consuming if each output must be tested sequentially and measurements are being performed through external equipment. Using the built-in measurement capabilities of N6791A electronic DC loads, all outputs can be measured simultaneously allowing multiple output power systems to be tested in a shorter period.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6791A Data sheet

• Double-wide module, up to 2 modules in mainframe
• Maximum 200 Watts sinking power per module
• Voltage: Up to 60V
• Current: Up to 40A
• Advanced operating Modes: CV, CC, CR, CP
• Arbitrary waveform generation
• High speed synchronized digitization of voltage and current
• Superior command processing time and current slew rate
• USB, LAN, GPIB interfaces standard
• N6700C style user interface for ease of use and familiarity

The Keysight N6792A offer 1U height modular electronic DC load module for N6700C mainframes. Capable of sinking power up to 200W per channel and be configured with up to two modules in a mainframe.

Testing multiple DC power conversion systems can be time consuming if each output must be tested sequentially and measurements are being performed through external equipment. Using the built-in measurement capabilities of N6792A electronic DC loads, all outputs can be measured simultaneously allowing multiple output power systems to be tested in a shorter period.

For bench use take advantage of the N6705C mainframe. The powerful built-in arbitrary waveform generator allows users to emulate complex load profiles. Use the built-in data logger or scope capture to simplify generation of test reports for your application.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N6792A Data sheet

Output Ratings

• 20 V
• 50 A
• 1000 W

Accurately characterize your DUT's power profile with advanced measurement capability

• Dual voltage and current measurement capability with DMM-like accuracy
• Power, peak power, watt hour, and amp hour measurements

Full two-quadrant operation for power storage test applications

• Provides continuous smooth operation between +current and - current transitions
• Provides + and - programmable current limits, programmable + and - current waveforms, and automatic downprogramming
• Full two-quadrant operation requires N7909A power dissipater units, standalone power supply offers 10% rated current two-quadrant operation

Track power events with a black-box recorder

• Optional accessory N7908A black-box recorder
• Works in the background tracking power events whenever the APS supply is on
• Records measurement data, trigger events, status bits, and more

Add power flexibility to your test system with built-in APS paralleling up to 10 kW

• Ensures equal current sharing among paralleled supplies
• Implemented with three wire connection on power supply rear panel
• Ensures each paralleled supply operates in its intended mode, whether that is CV or CC

The N7900 Series dynamic DC power supplies are designed for automated test equipment (ATE) applications where high-speed dynamic sourcing and measurement is needed.

Turn any APS power supply into not only a source but a load as well, which is great for power storage applications. Add full, 2-quadrant operation to any APS power supply with the N7909A APS power dissipater unit.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N7951A Data sheet
• Keysight N7951A User Manual

Output Ratings

• 40 V
• 25 A
• 1000 W

Accelerate test throughput with industry-leading specifications

• Test speeds 100x faster than standard system power supplies
• Command processing speed < 2ms
• Fast up/down programming speeds up to 500 µs
• Adjustable measurement rate to balance speed and accuracy

Accurately characterize your DUT's power profile with advanced measurement capability

• Dual voltage and current measurement capability with DMM-like accuracy
• Power, peak power, watt hour, and amp hour measurements

Full two-quadrant operation for power storage test applications

• Provides continuous smooth operation between +current and - current transitions
• Provides + and - programmable current limits, programmable + and - current waveforms, and automatic downprogramming
• Full two-quadrant operation requires N7909A power dissipater units, standalone power supply offers 10% rated current two-quadrant operation

Track power events with a black-box recorder

• Optional accessory N7908A black-box recorder
• Works in the background tracking power events whenever the APS supply is on
• Records measurement data, trigger events, status bits, and more

Add power flexibility to your test system with built-in APS paralleling up to 10 kW

• Ensures equal current sharing among paralleled supplies
• Implemented with three wire connection on power supply rear panel
• Ensures each paralleled supply operates in its intended mode, whether that is CV or CC

The N7900 Series dynamic DC power supplies are designed for automated test equipment (ATE) applications where high-speed dynamic sourcing and measurement is needed.

Turn any APS power supply into not only a source but a load as well, which is great for power storage applications. Add full, 2-quadrant operation to any APS power supply with the N7909A APS power dissipater unit.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N7952A Data sheet
• Keysight N7952A User Manual

Dynamic Power, Dynamic Measurements, Higher Accuracy

The Keysight Advanced Power System (APS) N7900 Series is a full-featured supply designed for automated test equipment (ATE) applications that benefit from high-speed dynamic sourcing and measurement. The highly integrated N7900 enables you to accelerate your test-system throughput with industry-leading speed and precision measurements. The APS N7900 has all the capabilities of the N6900 but also includes dynamic output power, dynamic measurements, and higher accuracy. While standard on the N7900, high accuracy, dynamic sourcing, and power are available as separate options on the N6900.

Output ratings

• 9 V
• 200 A
• 2000 W

Accelerate test throughput with industry-leading specifications

• Test speeds 100x faster than standard system power supplies
• Command processing speed < 2ms
• Fast up/down programming speeds up to 500 µs
• Adjustable measurement rate to balance speed and accuracy

Accurately characterize your DUT's power profile with advanced measurement capability

• Dual voltage and current measurement capability with DMM-like accuracy
• Power, peak power, watt hour, and amp hour measurements

Full two-quadrant operation for power storage test applications

• Provides continuous smooth operation between +current and - current transitions
• Provides + and - programmable current limits, programmable + and - current waveforms, and automatic downprogramming
• Full two-quadrant operation requires N7909A power dissipater units, standalone power supply offers 10% rated current two-quadrant operation

Track power events with a black-box recorder

• Optional accessory N7908A black-box recorder
• Works in the background tracking power events whenever the APS supply is on
• Records measurement data, trigger events, status bits, and more

Add power flexibility to your test system with built-in APS paralleling up to 10 kW

• Ensures equal current sharing among paralleled supplies
• Implemented with three wire connection on power supply rear panel
• Ensures each paralleled supply operates in its intended mode, whether that is CV or CC

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N7970A Data sheet
• Keysight N7970A User Manual

Output Ratings

• 40 V
• 50 A
• 2000 W

Accelerate test throughput with industry-leading specifications

• Test speeds 100x faster than standard system power supplies
• Command processing speed < 2ms
• Fast up/down programming speeds up to 500 µs
• Adjustable measurement rate to balance speed and accuracy

Accurately characterize your DUT's power profile with advanced measurement capability

• Dual voltage and current measurement capability with DMM-like accuracy
• Power, peak power, watt hour, and amp hour measurements

Full two-quadrant operation for power storage test applications

• Provides continuous smooth operation between +current and - current transitions
• Provides + and - programmable current limits, programmable + and - current waveforms, and automatic downprogramming
• Full two-quadrant operation requires N7909A power dissipater units, standalone power supply offers 10% rated current two-quadrant operation

Track power events with a black-box recorder

• Optional accessory N7908A black-box recorder
• Works in the background tracking power events whenever the APS supply is on
• Records measurement data, trigger events, status bits, and more

Add power flexibility to your test system with built-in APS paralleling up to 10 kW

• Ensures equal current sharing among paralleled supplies
• Implemented with three wire connection on power supply rear panel
• Ensures each paralleled supply operates in its intended mode, whether that is CV or CC

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N7972A Data sheet
• Keysight N7972A User Manual

Keysight basic DC power supplies offer essential features for a tight budget. The Keysight N8758A is an 80 V, 65 A, 5,200 W, single-output power supply in a small 2U package. It offers flexible AC input options, analog / resistance control of output voltage and current, and parallel and series connection of multiple supplies to achieve more output current or voltage.

Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed after delivery.

If you purchase and receive the wrong AC input voltage option, you would need to return the unit. Product returns are subject to Keysight approval and applicable charges. You would then need to place a new order.

DC Output Ratings

• voltage: 80 V
• current: 65 A
• power: 5,200 W

Programming Accuracy

• voltage: 0.025% + 60 mV
• current: 0.1% + 195 mA

Output Ripple and Noise

• CV p-p: 100 mV
• CV rms: 15 mV

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8758A Data sheet
• Keysight N8758A User Manual

DC output ratings

• Voltage: 0 to 500 V
• Current: 0 to 30 A
• Power: 5000 W

AC input

• Voltage range: 187 to 240 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies.

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 to 1500 V and 10 to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with > 100 kW of total output power. The built-in parallel link enables programming as if it's one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with > 100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25 in / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard
• Download BenchVue Basic app for free to control your instruments

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8923A Data sheet
• Keysight N8923A User Manual

The Keysight N8900 Series power supplies provide 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at the right price. The power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies

Get stable output power, built-in voltage, and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies include many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parallel link enables programming as if it's just one big power supply; no need to program each supply individually.

DC output ratings

• Voltage: 0 to 80 V
• Current: 0 to 340 A
• Power: 10000 W

AC input

• Voltage range: 187 - 240 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8925A Data sheet
• Keysight N8925A User Manual

DC output ratings

• voltage: 0 to 80 V
• current: 0 to 510 A
• power: 15000 W

AC input

• voltage range: 187 - 240 VAC

Programming accuracy

• voltage: 0.1% of full-scale
• current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• autoranging output does the job of multiple power supplies
• 5 kW, 10 kW, and 15 kW maximum output power
• up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• just the right amount of performance at just the right price
• easily parallel units to create “one” power supply with >100 kW of power
• built-in voltage and current measurement
• high-power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from overvoltage, overcurrent, and overtemperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8931A Data sheet
• Keysight N8931A User Manual

DC output ratings

• Voltage: 0 to 200 V
• Current: 0 to 210 A
• Power: 15000 W

AC input

• Voltage range: 187 - 240 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8932A Data sheet
• Keysight N8932A User Manual

• Maximum Power: 15 kW DC
• Maximum Output DC Voltage: 1500 VDC
• Input Voltage: 208 VAC
• I/V Curve Specification: Curve Mode or Table Mode (up to1024 points)
• Parallel supplies up to 150 kW at 1,500 VDC
• Can also be used as an autoranging DC power supply

The Keysight N8937APV Photovoltaic (PV) Array Simulator enables you to develop, verify, and optimize the performance of your inverter maximum power point tracking algorithms. Developing and verifying the performance of inverter maximum power point tracking (MPPT) algorithms is challenging. MPPT algorithms are complex, and under-the-sun testing with a comprehensive set of temperature and irradiance conditions is difficult, expensive, and time consuming.

Use the Keysight N8937APV Photovoltaic Array Simulators in your design laboratory or on your manufacturing line to simulate the output characteristics of a real-world photovoltaic array. The N8937APV PV array simulator is an autoranging, programmable DC power source that can quickly simulate I-V curve characteristics under different environmental conditions (temperature, irradiance, age, cell technology, and more), enabling you to quickly and comprehensively test your solar inverters.

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8937APV Data sheet
• Keysight N8937APV User Manual

DC output ratings

• Voltage: 0 to 750 V
• Current: 0 to 20 A
• Power: 5000 W
• VAC Input: 400

AC input

• Voltage range: 360 - 440 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8944A Data sheet
• Keysight N8944A User Manual

DC output ratings

• Voltage: 0 to 500 V
• Current: 0 to 60 A
• Power: 10000 W

AC input

• Voltage range: 360 - 440 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8948A Data sheet
• Keysight N8948A User Manual

DC output ratings

• Voltage: 0 to 1000 V
• Current: 0 to 30 A
• Power: 10000 W

AC input

• Voltage range: 360 - 440 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8950A Data sheet
• Keysight N8950A User Manual

DC output ratings

• Voltage: 0 to 80 V
• Current: 0 to 510 A
• Power: 15000 W

AC input

• Voltage range: 360 - 440 VAC

Programming accuracy

• Voltage: 0.1% of full-scale
• Current: 0.2% of full-scale

The Keysight N8900 Series provides 5 kW, 10 kW, and 15 kW autoranging, single-output programmable DC power for ATE applications that require just the right amount of performance at just the right price. The N8900 Series power supplies' autoranging output characteristic enables unprecedented flexibility by offering a wide range of voltage and current combinations at full power. Power supplies with “rectangular,” or traditional, output characteristics provide full power at only one voltage and current combination. Just one N8900 does the job of multiple power supplies. It's like having many power supplies in one!

The N8900 Series provides stable output power, built-in voltage and current measurements, and autoranging output voltage and current from 80 V to 1500 V and 10 A to 510 A. These supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development and compact 3U design to save rack space. If more power is required, easily parallel multiple N8900 units to create “one” power supply with >100 kW of total output power. The built-in parent/subsidiary control enables programming as if it's just one big power supply; no need to program each supply individually.

• Autoranging output – does the job of multiple power supplies!
• 5 kW, 10 kW, and 15 kW maximum output power
• Up to 1500 V and up to 510 A
• 14 different voltage, current, and power combinations available in 208 VAC or 400 VAC (28 total models)
• Just the right amount of performance at just the right price
• Easily parallel units to create “one” power supply with >100 kW of power
• Built-in voltage and current measurement
• High power density, 15 kW in only 3U (5.25” / 13.34 cm)
• Protection from over-voltage, over-current, and over-temperature
• LAN (LXI Core), USB, GPIB, and analog interfaces all standard

Adding options and accessories may impact shipping times

Request a customized version of this model by requesting a Custom Quote

• Keysight N8951A Data sheet
• Keysight N8951A User Manual